Skip to content
Loading...

hw Sodium bicarbonate

from 14,13 

Sodium bicarbonate fine powder form, for the adaptation of water parameters (Carbonate hardness). Pure sodium bicarbonate (NaHCO3) in the finest crystalline form.

  • to elevate the carbonate hardness / alkalinity and calcium level according to the Calcium chloride / Sodium bicarbonate method.
  • to elevate the carbonate hardness / alkalinity and the Magnesium concentration according to the Magnesium chloride / Sodium bicarbonate method.
Loading...

(NaHCO3)

Calcium and Carbonate addition according to the combined Calcium chloride and Sodium bicarbonate dosing.

Best practice:

Applying this method , calcium concentration and carbonate hardness would be increased by adding hw-Calciumchlorid (CaCl2) and hw-Natriumhydrogencarbonate (NaHCO3) to the aquarium water. As  side effect Cl (chloride) and Na (sodium) will remain and this both elements will result to NaCl which is simple salt. So far the NaCl is one of the main compounds of marine water but a steadily raising concentration of NaCl would lead to a increasing adulteration of the marine water composition and can cause on long term major problems.

To avoid this changes in the water composition the missing elements should be added by using a certain quantity of  a „NaCl-free“ marine salt formulation like hw®-MineralMarin. The end balance of all added elements will than result again in a complete marine water formulation with nearly no surplus of elements.

By applying this method over longer time the salinity / density of the aquarium water will raise slowly (or even faster) so that you should have always a eye on this values. If the salinity / density will raise too much you will have to counteract this with a smaller water change of fresh water.

Magnesium and Carbonate addition according to the combined Calcium chloride and Sodium bicarbonate dosing.

Best practice:

Applying this method , the Magnesium concentration and carbonate hardness would be increased by adding hw®-Magnesiumchlorid-Hexahydrat (MgCl2 x 6H2O) and hw®-Natriumhydrogencarbonate (NaHCO3) would be added to the aquarium water. As  side effect Cl (chloride) and Na (sodium) will remain and this both elements will result to NaCl which is simple salt. So far the NaCl is one of the main compounds of marine water but a steadily raising concentration of NaCl would lead to a increasing adulteration of the marine water composition and can cause on long term major problems.

To avoid this changes in the water composition the missing elements should be added by using a certain quantity of  a „NaCl-free“ marine salt formulation like hw®-MineralMarin. The end balance of all added elements will than result again in a complete marine water formulation with nearly no surplus of elements.

By applying this method over longer time the salinity / density of the aquarium water will raise slowly (or even faster) so that you should have always a eye on this values. If the salinity / density will raise too much you will have to counteract this with a smaller water change of fresh water.

Weight 5 kg
Gebindegröße u. Verpackungsform

500 g, 1.000 g, 5.000 g, 10kg, 20 kg, 25 kg

Gratis für Sie

Ab einen Warenwert von 100€ erhalten Sie ein Fläschchen unserer 
hw-Flüssigprodukte (250ml)
gratis zu Ihrer Bestellung dazu.

Die Auswahl ist riesig! Da ist für jeden was dabei.

Company holidays

from July 12th, 2021 to August 2nd, 2021

During this time no dispatch, pick-up

or acceptance of goods is possible!